Being a leader in both the firearms and ammunition industry Remington knows how important it is to have the highest quality ammunition available to make your firearm perform to its fullest potential. This starts with using the best components possible to manufacture ammunition. These are the same primers Remington uses in the production of their own ammunition and performs to their highest standards. If you want the best possible out of your firearm you have to start with the best that’s why reloaders choose Remington components for their loads.
Within every Remington primer is a group of subcomponents assembled to exceptionally tight tolerances. Primer cup dimensions are controlled to .0001″, and the priming mix is specially formulated for consistent ignition with a wide variety of powder types. Primers are tested for reliability from -20 degrees F to +150 degrees F. The unique tripod anvil design creates a larger strike area with maximum sensitivity, even with off center firing pin strikes.
Made In United States of America.
Within every centerfire primer is a group of sub-components assembled to exceptionally precise tolerances. Primer cup dimensions are controlled to four decimal places. The priming mix is specially formulated for consistent ignition with a wide variety of powder types, and tested for reliability over a temperature range of -20°F to +150°F. Individual primer pellet weight is controlled to .01 grams. A unique tripod anvil design creates a larger “sweet spot” with maximum sensitivity – even with off-center firing pin strikes. And lastly, each lot is 100% visually inspected and subjected to critical ballistic tests.
Packed 100 per sleeve, 10 sleeves per box
- Consistent ignition with a wide range of powder types
- Reliable ignition from -20°F to +150°F
- Unique tripod anvil creates a larger “sweet spot” with maximum sensitivity
- Pellet weight controlled to .01 grams and metallic dimensions controlled to .0005
|Condition||New in Box|
|Manufacturer Part Number||22600|